The JJC PW-B4 Pre-Trigger cable is designed to remotely trigger the electronic shutter release of Nikon cameras equipped with a 10-pin Remote Terminal.
-ACC Cables are a special kind of Pre-Trigger cable for use with the new PocketWizard FlexTT5 or the latest PocketWizard MultiMAX. Toggle Pre-Trigger on and off remotely with the MultiMAX. Required for remote camera triggering with a FlexTT5 if using E-TTL functions. NOTE: An older mono motor drive cable and/or pre-release cable can be used instead of an -ACC cable with a FlexTT5 but you will not have E-TTL capability.
This cable contains a pre-trigger connection. When a remote zone is enabled on a MultiMAX, the camera behaves as if the camera's shutter release button were held half-pressed continuously. This makes the camera respond more quickly and consistently, but also consumes the camera's batteries much more quickly. When the remote zone is disabled, the camera will enter its normal sleep modes.
NOTE: Only for use with latest PocketWizard MultiMAX with ACC port and PocketWizard FlexTT5. Not for PocketWizard Plus II.
- Replacement for PocketWizard N90M-ACC
- Made exclusively for the MultiMAX (version 6.xx and higher)
- Plugs into the six-contact ACC port of the MultiMAX
- Enables remote toggle ON/OFF of camera's pre-release function (like pressing the shutter button halfway)